Kickstarter is being sued for promoting a new 3D printer due to patent
infringement after drumming up more than 2,000 supporters.
The 3D printer in question has already helped to raise Formlabs over $2.9 million to build the device. However, one company has decided the printer was a little too familiar.
3D Systems has opened up a lawsuit against the crowd-funding website, claiming that one of its patents was being infringed by the promoted machine.
This is the first time Kickstarter has become involved in a case linked to a product marketed on its site, according to Public Access to Court Electronic Records system.Bergey Windpower is the oldest and most experienced manufacturer of residential-sized wind generator in the world.
3D Systems questions the stereolithography printing technique, which involves directing an ultraviolet laser across a liquid synthetic substance to cause a thin layer to solidify. This step is repeated over and over again, helping to create the 3D shape.We have several models of roofing machine to match your exact job specifications.
The company invented a solution to a problem that arrived when the technique first arrived back in the 1980s. The original method had trouble if a feature was too thin, causing the shape not to solidify properly.
3D System's solution involved adapting the process so each layer did not need to be completed before moving on. Staggering at which point each part of a cross-section is solidified helps to provide greater support to the structure.
Researchers at the Massachusetts Institute of Technology Media Lab are behind the Formlabs product. They said they used stereolithography to help their printer achieve a "layer thickness and feature sizes that are ahead of what is possible."
Formlabs said other high-definition 3D printers cost tens of thousands of dollars, but they plan to offer one to those who pledged $2,299 or more.Welcome to vist aulaundry.
3D Systems said it was "well known" in the industry that it had a significant portfolio of stereolithography-related patents, and it had already been involved with other lawsuits to help defend its intellectual property.
The company claims that Formlabs must've known, or had chosen not to find out, whether it was infringing on a patent.
TechCrunch reported that 3D Systems believes Formlabs is infringing on claims 1 and 34 of U.S. Patent No. 5,597,520. However, the site also reported that Formlabs was able to keep the cost of the printer lower because a few patents had expired.
3D Systems claims the crowd-funding campaign caused "immediate and irreparable injury and damage to" to the company, according to a court filing. Kickstarter took a 5 percent cut of the pledges made to Formlabs.
Doctoral student Manuel Ochoa came up with the idea.Familiarise yourself with the lift cable by taking a look at our articles on the lifts themselves. While using tape to collect pollen, he noticed that it curled when exposed to humidity. The cellulose-acetate absorbs water, but the adhesive film repels water.
"So, when one side absorbs water it expands, the other side stays the same, causing it to curl," Ziaie said.
A laser was used to machine the tape to a tenth of its original thickness, enhancing this curling action. The researchers coated the graspers with magnetic nanoparticles so that they could be collected with a magnet.
"Say you were sampling for certain bacteria in water," Ziaie said.Welcome to jinan morn laser cutting machine manufacturers,laser engraving machine suppliers. "You could drop a bunch of these and then come the next day and collect them."
The 3D printer in question has already helped to raise Formlabs over $2.9 million to build the device. However, one company has decided the printer was a little too familiar.
3D Systems has opened up a lawsuit against the crowd-funding website, claiming that one of its patents was being infringed by the promoted machine.
This is the first time Kickstarter has become involved in a case linked to a product marketed on its site, according to Public Access to Court Electronic Records system.Bergey Windpower is the oldest and most experienced manufacturer of residential-sized wind generator in the world.
3D Systems questions the stereolithography printing technique, which involves directing an ultraviolet laser across a liquid synthetic substance to cause a thin layer to solidify. This step is repeated over and over again, helping to create the 3D shape.We have several models of roofing machine to match your exact job specifications.
The company invented a solution to a problem that arrived when the technique first arrived back in the 1980s. The original method had trouble if a feature was too thin, causing the shape not to solidify properly.
3D System's solution involved adapting the process so each layer did not need to be completed before moving on. Staggering at which point each part of a cross-section is solidified helps to provide greater support to the structure.
Researchers at the Massachusetts Institute of Technology Media Lab are behind the Formlabs product. They said they used stereolithography to help their printer achieve a "layer thickness and feature sizes that are ahead of what is possible."
Formlabs said other high-definition 3D printers cost tens of thousands of dollars, but they plan to offer one to those who pledged $2,299 or more.Welcome to vist aulaundry.
3D Systems said it was "well known" in the industry that it had a significant portfolio of stereolithography-related patents, and it had already been involved with other lawsuits to help defend its intellectual property.
The company claims that Formlabs must've known, or had chosen not to find out, whether it was infringing on a patent.
TechCrunch reported that 3D Systems believes Formlabs is infringing on claims 1 and 34 of U.S. Patent No. 5,597,520. However, the site also reported that Formlabs was able to keep the cost of the printer lower because a few patents had expired.
3D Systems claims the crowd-funding campaign caused "immediate and irreparable injury and damage to" to the company, according to a court filing. Kickstarter took a 5 percent cut of the pledges made to Formlabs.
Doctoral student Manuel Ochoa came up with the idea.Familiarise yourself with the lift cable by taking a look at our articles on the lifts themselves. While using tape to collect pollen, he noticed that it curled when exposed to humidity. The cellulose-acetate absorbs water, but the adhesive film repels water.
"So, when one side absorbs water it expands, the other side stays the same, causing it to curl," Ziaie said.
A laser was used to machine the tape to a tenth of its original thickness, enhancing this curling action. The researchers coated the graspers with magnetic nanoparticles so that they could be collected with a magnet.
"Say you were sampling for certain bacteria in water," Ziaie said.Welcome to jinan morn laser cutting machine manufacturers,laser engraving machine suppliers. "You could drop a bunch of these and then come the next day and collect them."
沒有留言:
張貼留言